Pipe Stoppers are products which are used to dull the pipelines temporarily. Pipe Stoppers are made from SBR+NR mixed rubber, nylon cord, Kevlar cord and strong fabrics. They are able to run between -30°C and + 70°C. They are tested at the 1, 3 times higher than their working pressure and they have ultrahigh bursting pressure. Their biggest advantage is that they reach the high friction force rate in the working pressure grasping the pipe diameter at very low pressures.
Pipe Stoppers are primarily used for leak testing. This leak testing method allows for underground detection and location of leaks without the costly removal of pipelines. Pipe Stoppers allows for locating leaks to make repairs quicker, chaper, and easier.
PlugCo produce Pipe Stoppers up to 144” size and up to 6 Bar back pressure. All of PlugCo products fulfill The European Standard EN 1610 requirements.
We have the rugged Pipe Test Stoppers to help you get the job done. Please take a look here our full range of Pipe Test Stoppers.
Advantageous of Pipe Stoppers
- Most Cheaper and effective solution for gravity lines leakage tests.
- Easy to install.
- Reusable plugs work on small diameter plastic, steel, iron and copper pipes.
- They are an easy and cost-effective way to plug your pipes.
- Flexibility assists when working within confined areas.
Manufacturer warrants all pneumatic plugs manufactured by it and shown in this manual will be free from defects in material and workmanship for one (1) year following the date of manufacture. If any of the goods are found to be defective, such goods will, at manufacturer’s option be replaced or repaired at manufacturer’s cost. The parties hereto expressly agree that buyer’s sole and exclusive remedy against the manufacturer shall be for the repair and/or replacement of defective goods as provided herein. (The sole purpose of the stipulated exclusive remedy shall be to provide the buyer with free repair and replacement of defective goods in the manner provided herein. The exclusive remedy shall not be deemed to have failed of its essential purpose so long as the manufacturer is willing and able to repair or replace defective goods in the prescribed manner.) Goods which may be sold by manufacturer but are not manufactured by it are not warranted by manufacturer, but are sold only with the warranties, if any, of the original manufacturers thereof.
(This warranty does not cover labor or other costs or expenses to remove or install any defective, repaired or replaced goods.) Manufacturer’s warranty does not apply to any goods which have been subjected to misuse, mishandling, misapplication, neglect (including but not limited to use of unauthorized parts or attachments), or adjustment or repair performed by anyone other than manufacturer or one of manufacturer’s authorized agents.
Defective Products Policy
To obtain performance under this warranty, any product suspected of having a manufacturing defect in materials or workmanship at manufacturers request must be returned to PlugCo Incorporated, freight prepaid, for inspection. A returned goods authorization (RGA) must be obtained before shipping any product back to PlugCo. Contact (firstname.lastname@example.org)
Customer Transportation Reimbursement
Whenever PlugCo repairs or replaces a product at PlugCo’S expense, PlugCo will reimburse the distributor by credit memo, the same surface freight amount it cost PlugCo to return the warranty items.
The foregoing warranty is in lieu of all other warranties express or implied, including those of merchantability or fitness for any purpose not expressly set forth herein. No affirmation of manufacturer,
by words or action, other than as set forth in this language shall constitute a warranty.