Accessories list in our product range

PlugCo Accessories

  • Air Hose: AH10

    It is used for inflation of products (pipe plug, pipe test plug, joint tester….)

  • Air Hose With Pressure Gauge

    it is used for measuring/monitoring the pressure inside the pipe test area

  • Pressure Control Device Model: ACD 0-1,5

    They are used for controlling/monitoring the pressure during the inflation.

  • Air Control Device with pressure Regulator Model: ACD-Preg

    They are used for controlling/monitoring the pressure during the inflation.

  • Air Control Device with pressure Relief Valve

    They are used for controlling/monitoring the pressure during the inflation as well as discharge the air into the pipe plug.

  • Water Hose: WH-10

    It is used for filling the water inside the test area. It is used with pipe test plug. if you want to make leak test by water, it is used that one with pipe test plug to fill the water.

  • Air Test Adaptor: ATA

    It is used for filling the air into the test area and measure the pressure inside the test area. In case of making leak test by air, it is used with pipe test plug instead of water hose for filling the air into the test area.

  • Air Discahrge Adaptor: ADA

    It can be used for discharging the compressed air into the pipe line. Once making leak test by water, there will be compressed air into the pipe line. It is thrown out with help of this adaptor

  • Adaptors

    Adaptors are used to change the connection point of pipe plug, air hose or air supplier.


Technical Data Sheets

×